Description

COLD CHISEL

A cold chisel is a specialized metalworking hand tool used for cutting, shaping, and breaking hard materials, such as metal, stone, or brick . It is designed to be struck with a hammer and typically does not have a handle.

Here are some of the key features of a cold chisel:

• Sharp edge: The working end of a cold chisel has a sharp edge that is ground to a specific angle depending on the intended use. For example, chisels used for cutting metal will have a steeper angle (around 70 degrees) than chisels used for breaking stone (around 45 degrees).
• Flat shank: The long end of the cold chisel, opposite the cutting edge, is flat. This flat shank is designed to be struck with a hammer to drive the chisel into the workpiece.
• Steel construction: Cold chisels are typically made of hardened, high-carbon steel to withstand the repeated impact of a hammer.

Here are some common uses for cold chisels:

• Cutting metal: Cold chisels can be used to cut sheet metal, rods, or bolts.
• Breaking stone or brick: Cold chisels can be used to break up concrete, stone, or brick.
• Chipping slag or weld spatter: Cold chisels are commonly used in metalworking to remove slag (the glassy residue left behind from the welding process) or spatter (molten metal droplets that come off the electrode during welding).
• Demolition work: Cold chisels can be used for small demolition jobs, such as breaking through plaster or tile.

When using a cold chisel, it is important to wear safety glasses to protect your eyes from flying debris. It is also important to use a hammer that is the right size and weight for the chisel. A hammer that is too heavy can damage the chisel, while a hammer that is too light will not be effective.

• Special tool steel
• Powder coated
• Packing: color sticker

STOCK NO.	SIZE	QTY./CARTON
25083	4x16x250mm	36
25084	4x18x300mm	24

COLD CHISEL

• Special tool steel
• Powder coated
• Packing: color sticker

STOCK NO.	SIZE	QTY./CARTON
25087	22x16x250mm	36
25088	24x18x300mm	24

COLD CHISEL

• Special tool steel
• Powder coated
• Packing: color sticker

STOCK NO.	SIZE	QTY./CARTON
25082	4x16x250mm	36