ENGINE CRANE

An engine crane, also known as an engine hoist, is a vital piece of equipment used in machine shops, auto body repair shops, and garages to remove and install heavy engines in vehicles. It uses a heavy cantilevered support structure to hold the engine securely suspended in mid-air, allowing mechanics to safely work on the engine and its connected parts within the tight confines of the engine bay.

Hydraulic hoists:These cranes use a hydraulic pump to lift and lower the engine. They are typically the most expensive type of engine crane, but they are also the easiest to use.

Chain hoists:These cranes use a chain hoist mechanism to lift and lower the engine. They are less expensive than hydraulic hoists, but they can be more difficult to use.

Electric chain hoists:These cranes are a hybrid of hydraulic and chain hoists. They use an electric motor to power the chain hoist mechanism. They are a good middle ground in terms of cost and ease of use.

When choosing an engine crane, it is important to consider the weight of the engines you will be lifting. Engine cranes typically have a weight capacity of 1 to 10 tons. You should also consider the height of your workspace and the clearance you will need to maneuver the engine.

Here are some additional safety tips for using an engine crane:

• Always inspect the crane before each use to make sure it is in good working order.
• Never overload the crane.
• Use a sling that is properly rated for the weight of the engine.
• Be sure the engine is securely attached to the sling before lifting it.
• Have a spotter help you lift and lower the engine.